We may earn a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more

Aquarium Volume Calculator

Enter your tank's measurements to see how many gallons and liters it holds, how much it weighs when full, and what size filter and heater it needs.

Tank shape
outside measurements are fine for an estimate
Total volume–
Actual water (after gravel, decor and the gap at the top)–
Weight when set up (≈10 lb per gallon)–
Filter flow (4–6× volume per hour)–
Heater–
Weekly water change (10–25%)–

Rules of thumb, not exact engineering. Follow the stand and equipment makers' limits, and check that your floor can carry the weight of large tanks.

Before you fill the tank

  • Level and stand. Place the tank on a level stand rated for its full weight — uneven support can crack the glass.
  • Cycle first. Run the filter for several weeks to grow beneficial bacteria before adding most fish, and test the water.
  • Dechlorinate. Treat tap water with a water conditioner every time you add or change water.

Choosing equipment? See our guides to aquarium tanks, filters and pumps and heaters and water care.

Questions

How do I calculate how many gallons my fish tank holds?

Measure the inside length, width and water height in inches, multiply them, and divide by 231 (the number of cubic inches in a US gallon). In centimeters, multiply the three numbers and divide by 1,000 to get liters. The calculator does this for you, and also shows the smaller amount of water a tank really holds once gravel, decorations and the gap at the top are taken into account.

How heavy is a full aquarium?

Water alone weighs about 8.3 pounds per US gallon (1 kg per liter). With the glass, gravel, rocks and stand, a common rule of thumb is about 10 pounds per gallon, so a 20-gallon tank is roughly 200 pounds. Always put larger tanks on a stand made for aquariums, on a level, solid floor.

What size filter do I need?

A common guideline is a filter rated to move about 4 to 6 times the tank volume every hour. A 20-gallon tank would use a filter rated around 80–120 gallons per hour (GPH). Rated flow drops once media gets dirty, so the higher end is a safer choice. Goldfish and other messy fish benefit from even more filtration; delicate fish such as bettas prefer gentle flow.

What wattage heater do I need?

A widely used rule is about 3–5 watts per gallon. Use the higher figure if the room is much colder than the tank (for example a cool basement in winter). For tanks over about 40 gallons, two smaller heaters at each end spread the heat and give you a backup if one fails.

How much water should I change each week?

Most freshwater tanks do well with a 10–25% water change every week, using dechlorinated water at about the same temperature. Smaller, regular changes are gentler on fish than big, rare ones.